A Fireside company - serving Winchester, NV

Lennox Heating & Furnace in Winchester, NV

Furnace & heatingFurnace & heating
AC repairAC repair
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system*On approved credit; ask us about your options

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Lennox Heating & Furnace in Winchester: What to Know First

We provide independent Lennox heating and furnace service in Winchester, including diagnosis, repair, tune-ups, and replacement, usually on the same call you make. Most furnace repairs finish in a single visit, and replacement work is scheduled once the written fixed price is in your hands. Repair in Winchester typically runs $150 – $700, and we quote before we touch anything, so the price we say is the price you pay.

Call (844) 783-5043

This page is for homeowners who already have a Lennox furnace, air handler, or combined system and want straight answers about what’s failing and what it costs to fix. We’re an independent Lennox service provider, not affiliated with or authorized by the manufacturer, and that independence means we recommend what your system actually needs. Call (844) 783-5043 and a live person will pick up, day or night.

How Lennox Products Fail – and How We Fix Them

Every brand has its habits, and Lennox is no different. After enough Winchester furnaces, you start to recognize the same handful of failures before you open the panel.

  • The ignitor that glows but never lights (G61MPV and similar 90%+ two-stage furnaces). Silicon nitride hot-surface ignitors in these units crack at the base from repeated heat cycling, and the furnace will run the blower with no flame, then lock out after three tries. The symptom that fools people: it glows orange and looks fine. Our diagnostic checks ignitor resistance and the ignition control’s flame-sense circuit together, because a weak ignitor and a dirty flame sensor produce nearly identical lockouts. We replace with the OEM ignitor matched to your control board, not a universal that draws differently.
  • Pressure switch faults on condensing furnaces. High-efficiency Lennox models in Winchester pull combustion air through PVC intake pipe, and our dusty valley air plus summer irrigation grit clogs the condensate trap and pressure switch ports by mid-season. The furnace short-cycles or refuses to fire. We clear the trap, test switch differential with a manometer, and check that the exhaust slope is correct. We don’t swap the switch and walk away, because the switch is usually the messenger, not the problem.
  • Failed inducers and draft issues on older G-series and Elite furnaces. A bearing going in the draft inducer sounds like a soft whine at startup that fades. Left alone, it seizes and the pressure switch never closes. We listen for it during tune-ups and measure amp draw against spec, so you hear about it before it strands you in January.
  • Cracked heat exchangers in 15-to-25-year-old Lennox units. The primary cells in older furnaces fatigue from thermal cycling, and a cracked exchanger is a carbon monoxide concern, not a repair decision to defer. We inspect with a camera where the design allows and pressure-test the secondary. If we find a crack, we tell you plainly and give you the repair-or-replace numbers in writing. No scare tactics, no overselling.
  • Gas valve and control board failures that mimic each other. On Lennox Signature and Elite systems, a valve that won’t open and a board that won’t send voltage look the same at the burners. We meter voltage at the valve during a call for heat so we replace the part that’s actually bad. This one matters, because guessing on a gas valve is expensive.
Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Our Lennox Heating & Furnace Process

A Lennox job here runs the same way every time, whether it’s a $160 ignitor or a full replacement.

  1. 1
    You call and reach a person. No voicemail tree, no callback window. We ask what the furnace is doing, note your model number if you have it, and set a time we’ll keep.
  2. 2
    We diagnose before we quote. A background-checked, uniformed technician puts on shoe covers without being asked, then runs the furnace through a full cycle: ignition, flame sense, inducer, heat rise, gas pressure, and heat exchanger inspection.
  3. 3
    We decide OEM versus aftermarket, with you. For ignitors, flame sensors, pressure switches, and control boards, we lean OEM on Lennox because the electronics are matched and it keeps your warranty intact. For blower motors and common wear parts, a quality aftermarket option sometimes saves real money. We’ll tell you which is which and why.
  4. 4
    We quote a fixed price, upfront. You hear the number before any work starts. A square deal: the price quoted is the price paid.
  5. 5
    We repair and test. The furnace comes back to temperature, cycles clean, and we check for gas leaks and carbon monoxide at the appliance before we pack up.
  6. 6
    We back it in writing. Every job carries our 90-Day Done Right Promise. If it isn’t right, we make it right, no arguing and no paperwork.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Lennox Heating & Furnace Costs in Winchester

Here’s what Winchester homeowners actually pay for the Lennox work we see most. Your quote is fixed before we start.

Lennox job Typical range in Winchester
Furnace repair (ignitor, flame sensor, pressure switch, gas valve) $150 – $700
Furnace tune-up and safety check $80 – $200 (our seasonal tune-up is $89)
Heat exchanger inspection and repair decision Included in diagnostic; replacement quoted separately
Furnace replacement, depending on size and efficiency Scheduled with a written fixed price after a load calculation

What moves the price: which part failed, whether it’s OEM or aftermarket, how hard the unit is to reach, and whether it’s a repair or a replacement. Estimates are free, and we’ll put a second opinion in writing on any estimate you’ve already been given.

Why Winchester Homeowners Call Fireside Heating & Air Co. Winchester for Lennox Work

We’ve served homeowners for over 42 years, and a lot of that work has been Lennox. Our technicians have up to 8 years of experience and are trained as journeymen on nine major brands, including Carrier and Trane, so we can tell you honestly whether your Lennox problem is a Lennox problem or just an old-furnace problem. Most jobs finish in a single visit. Every call reaches a live person around the clock, including the 2 a.m. no-heat night in Winchester when the temperature drops and your furnace won’t fire.

We’re steady and we’re plainspoken. We’ll tell you when a $200 repair is the smart move and when you’re throwing good money at a cracked exchanger. Then we stand behind the work in writing for 90 days. That’s the whole pitch.

FAQs

Can you work on my Lennox furnace if it’s still under warranty? Yes. We’re an independent service provider, so check your Lennox warranty terms before we start, and we’ll use OEM parts where the warranty requires it so your coverage stays intact. Call (844) 783-5043 with your model number and we’ll talk through it.

How fast can you get to my Lennox furnace in Winchester? Usually the same day, and we answer the phone around the clock, so the 2 a.m. no-heat call reaches a live person. Call (844) 783-5043 for the soonest opening.

Should I repair or replace my Lennox furnace? Repair makes sense when the fix is a wear part like an ignitor, pressure switch, or gas valve and the unit is under about 15 years old. Replacement is the honest answer when a heat exchanger is cracked, repairs are piling up, or a part is discontinued. We give you the numbers for both in writing and let you decide.

Do you stock Lennox parts, or do I have to wait? We source OEM Lennox parts, and for the common wear items we can often get you going the same visit. On less common parts we’ll tell you the lead time upfront and set a time we’ll keep. Call (844) 783-5043 for a free estimate.

Do you touch anything besides Lennox? Yes. We service nine major brands, including Carrier and Trane, so you’re covered whatever’s in your house.

Written by the team at Fireside Heating & Air Co. Winchester, serving Winchester and nearby areas.

Need HVAC help nationwide? Licensed & insured · 60-minute response · free estimates
Call (844) 783-5043
Local Service Coverage

Request a Free Estimate in Winchester

Tell us what you need - Fireside Heating & Air Co. Winchester responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch